Skip to content
Leka Studio

Splashpads for Active, Curriculum-Linked Water Play

Zero-depth water play gives a school the upside of a pool — gross-motor, sensory and outdoor-science learning — without the depth risk, the lifeguards or the compliance load.

We zone the pad by age band, design the surfacing to fall-height standards, and document the risk-benefit rationale your inspection team needs.

Children of mixed ages running through ground jets on a community splashpad, with a shaded pavilion behind
Key enhancements

What we deliver for school splashpads.

Zero-depth, no lifeguard

Flush jets and ground geysers — water play with no standing water, and far lower risk and supervision load than any pool.

Age-banded zoning

Gentle sprays and tactile panels for EYFS toddlers; geysers, tipping buckets and challenge features for primary — clearly zoned and signed.

Sensory and EYFS-aligned

Cause-and-effect panels and varied spray textures support sensory regulation and early-years exploration — water as a learning material.

Doubles as outdoor science

Flow, pressure and cause-and-effect features become a living resource for fluids, forces and the water cycle.

Safety-engineered surfacing

Non-slip, EN 1177 fall-height-rated surfacing with drainage designed in, and the risk-benefit assessment documented for inspection.

Water-wise to run

Closed-loop recirculation and UV keep running costs and water use low — sustainability the school can put in its newsletter.

Certified surfacing by Polysoft

The pad is poured in seamless Polysoft wet-pour: impact zones third-party certified to EN 1177, ASTM F1292 and AS/NZS 4422 fall-height standards, an anti-slip splash zone, and a flush, joint-free finish that rolls smoothly for wheelchairs and walkers — so SEND learners take part too.

Shop this splashpad

Every feature here is a real, spec'd product.

Blue markers open the equipment on Leka Catalogs; the teal marker opens our surfacing partner. Both open in a new tab.

Every feature here is a real, spec'd product.

Vortex splashpad at an island resort — branded tipping buckets, umbrella and leaf showers, a spray hoop, a tube-slide tower and ground geysers on a bright blue water deck
Why choose us

Why schools choose Leka Studio for splashpads.

Curriculum-led design

We start from your age bands and learning goals, then build the pad — not the other way round.

Compliance documented

EN 1176 / EN 1177 and ASTM aquatic-play guidance, with inspection-ready risk-benefit paperwork.

SEND-inclusive

Wheelchair-height interactive panels and graduated challenge so every learner can take part.

Phased to term time

Major works scheduled into break windows, pre-fabricated where possible to compress on-site time.

For architects & specifiers

Specifying play for a school or campus? We work the way your studio does.

Much of our work reaches the ground through the architects and landscape architects who design the schools and campuses it sits in. Here is what that partnership adds to your practice.

Schematic-phase design support

Brief us at concept or schematic stage and we send back layout options, 3D renders and a play-value rationale you can drop into a client presentation — free, with no obligation to buy.

BoQ-ready, bilingual specs

Each item arrives specified — dimensions, materials, safety zones, certifications — as drawing-ready line items in English and Thai, so your QS and your client read the same document.

Compliance evidence for your set

Play equipment certified to EN 1176, surfacing to EN 1177 / ASTM F1292, with critical-fall-height data sized to each structure — the documentation your specification and the site inspection need.

Factory-direct pricing

We manufacture and import directly, so the play budget buys specified-grade equipment at a transparent price — and tends to survive value engineering with the spec intact.

One accountable partner

Design support, supply, surfacing and installation under a single contract — so the outdoor-play scope does not fragment across your consultants and the main contractor’s trades.

Specified for the tropics

UV-stable, monsoon-drained and corrosion-rated for Southeast-Asian sites — so what leaves your drawings still performs and looks right after a few seasons on the ground.

Whether you’re designing a K-12 school, a university or campus building, an international school or an early-years or kindergarten setting, the play and outdoor-learning scope is the part we make drawing-ready.

Education FAQ

Common questions for this scope.

  • How is a splashpad safer than a school pool?

    It is zero-depth — no body of standing water to drown in — which removes the pool depth risk and the heavy lifeguard requirement.

  • Which age bands can share one pad?

    We zone gentle EYFS features apart from higher-energy primary features, with clear signage and sight-lines, so one pad can serve the whole school by timetable.

  • Does it work in the monsoon?

    It is outdoor water play already; with good drainage and surfacing it is usable across most of the academic year, and the plant winterises simply out of season.

  • How does the surfacing meet safety and accessibility standards?

    We pour Polysoft wet-pour rubber: impact areas are independently certified to EN 1177:2005 (and ASTM F1292-13 / AS-NZS 4422:2016) for critical fall height, the splash zone is anti-slip wet and dry, and the surface drains fast and stays cooler underfoot. Because it cures seamless and flush, there are no trip joints — wheelchairs and walkers cross it easily, keeping the pad inclusive for SEND learners.

  • Can you support our schematic or design-development phase?

    Yes. Brief us at concept or schematic stage and we return layout options, 3D renders and a play-value rationale you can put straight into a client presentation, at no cost. We stay available through DD and tender so the specification stays coordinated.

  • Do you provide BoQ-ready specifications and CAD/3D for our drawings?

    Every item is specified with dimensions, materials, safety zones and certifications — in English and Thai — as drawing-ready line items, with 2D footprints and 3D models or renders on request so your team can place equipment accurately.

  • Is the equipment certified to the standards we have to specify?

    Play equipment is certified to EN 1176 and surfacing to EN 1177 / ASTM F1292, with critical-fall-height data matched to each structure. We hand over the documentation your specification and the project’s safety inspection require.

Ready when you are

Ready to bring your space to life?

Tell us a bit about your project, and we'll craft a custom proposal tailored to your needs.

Brief us on a campus →

Chúng tôi sử dụng cookie cho phân tích và để hiểu cách khách truy cập sử dụng trang (ẩn danh, lưu trữ tại EU). Bạn có thể chấp nhận hoặc từ chối — từ chối không ảnh hưởng đến trang.